July - Aug 2017 Magazine

Removing the engine and gearbox from an XK engined E-Type is relatively simply. In the original workshop manual, Jaguar list two methods, first to lift the engine out from the top, and the second method is to lower the engine down into a pit. (Later versions of the manual only gives the first method)

For the home mechanic who is concerned about lifting the weight of the engine and gearbox to great heights and who does not have access to a pit, then this second method can be modified. Rather than lowering the engine into a pit, simply lift the car from the engine. See below.

Engine removal 3.8 Litre E-Type

STEP 1

Make padded support for over riders, release bonnet retaining support springs and raise bonnet to the point where there is no load on the bonnet hinges.

STEP 2

Support bonnet from above. Remove hinge bolts and roll car back

STEP 3

Remove exhaust pipes. Release all electrical, fuel, water, tailshaft, etc connections between engine and chassis. Remove radiator head tank. Remove inlet and outlet manifolds. Remove generator. Support weight of engine and gearbox, either with chain block or support from beneath on a suitable trolley. Remove front suspension torsion bars reaction plate. Release RH engine mount. Release LH engine mount and remove support bracket. Release central engine stabilizer. Release rear gearbox mount.

STEP 4

Lower engine and gearbox to support trolley. Fit chain block to top shock absorber mount bolts using suitable jig (two pieces 500mm x 50mm x 3mm flat). With handbrake on and rear wheels securely chocked, begin raising chassis.

STEP 5

Raise car chassis until free of engine, checking regularly for component fouling

STEP 6

Roll engine and gearbox from beneath chassis.

Mission accomplished...

Replacing is the reverse of the above. Enjoy

The September-October 2016 Edition of Queensland Jaguar Driver is now online

JDCQ Constitution Adopted April 2024

JDCQ By-Laws as amended August 2025

Certificate of Incorporation

Registration of Amendment of Rules 28-06-2021

May Jun 2017 Magazine

The May-June 2016 Edition of Queensland Jaguar Driver is now online

The July - August 2016 Edition of Queensland Jaguar Driver is now online

The January-February 2016 Edition of Queensland Jaguar Driver is now online

Select the form you require from the list below.

Trophy Nomination Form

Trophies Background for the two Memorial Awards

Attendance Form - PDF

Attendance Form - DOC

Leading a Run

Run Sheet for Leading a Run

Run Instructions example

BOM How it works & Previous Recipients

Badge of Merit Nomination Form

Volunteer of the Year Nomination Form

Life Membership 2023 Nomination Form

Membership Application Form

JDCQ AGM Notice of Meeting

JDCQ AGM 2025 Agenda

JDCQ AGM 2025 Nominations Form

JDCQ AGM 2025 Proxy Form

The objectives for which the club has been established are:-Peter Shield's 1995 Jaguar X300

1. To further interest in motoring and motor sport
2. To facilitate and assist in bringing together and keeping in touch owners of SS, Jaguar and Daimler cars.
3. To perpetuate the SS, Jaguar and Daimler cars and to promote enthusiasm among owners of these cars.
4. To promote better driving skills and standards
5. To render technical advice where possible
6. To promote events for SS, Jaguar and Daimler cars, including Jaguar engined cars
7. To hold and arrange sporting events and suitable competitions and provide or contribute towards the provision of prizes, awards and distinctions.